Santa’s Little Helper stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “SANTA’S LITTLE HELPER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 98 mm (3.94 × 3.84 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 20: 1 outer edge and 19 cut-outs |
| Cut length | 1,854 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 399 curve and line segments |
Measured from the file. PNG: 2,000 × 1,954 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.98 in (25 × 25 mm) | 0.28 mm | 471 mm | 100 | Too fine for most machines |
| 2 × 1.95 in (51 × 50 mm) | 0.56 mm | 942 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.93 in (76 × 74 mm) | 0.84 mm | 1,413 mm | 9 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.9 in (102 × 99 mm) | 1.1 mm | 1,884 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.86 in (152 × 149 mm) | 1.7 mm | 2,825 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.81 in (203 × 198 mm) | 2.2 mm | 3,767 mm | 1 | Vinyl, card and thin sheet |
| 12 × 11.71 in (305 × 297 mm) | 3.4 mm | 5,651 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Little Helper SVG files
-
Santa’s Little Helper with a drop shadow Layered · 12 pieces -
Santa’s Little Helper in Pacifico Solid · 8 pieces -
Santa’s Little Helper in Lobster Solid · 10 pieces -
Santa’s Little Helper in Kaushan Script Solid · 20 pieces -
Santa’s Little Helper in Lilita One Solid · 20 pieces -
Santa’s Little Helper in Alfa Slab One Solid · 20 pieces -
Santa’s Little Helper in Amatic SC Solid · 19 pieces -
Santa’s Little Helper in block capitals Solid · 19 pieces
← Santa’s Little Helper outline lettering All 12 Santa’s Little Helper designs Santa’s Little Helper with a drop shadow →