Free racing SVG

Dirt modified racing car SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dirt modified racing car, as a solid black shape
Dirt modified racing car. The preview is the SVG file itself.

A dirt track modified throwing dust: tall slab sides with a blank roundel, a cab opening with two bars across it, a low narrow bonnet and an open front wheel on its own arm.

What is in the file

Size100 × 44 mm (3.94 × 1.74 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length708 mm at this size
Narrowest part1.1 mm at this size
Nodes159 curve and line segments
Also found asModified race car SVG

Measured from the file. PNG: 2,000 × 927 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.28 mm180 mm190Too fine for most machines
2 × 0.88 in (51 × 22 mm)0.56 mm360 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.33 in (76 × 34 mm)0.84 mm539 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.77 in (102 × 45 mm)1.1 mm719 mm12Vinyl, card and thin sheet
6 × 2.65 in (152 × 67 mm)1.7 mm1,079 mm4Vinyl, card and thin sheet
8 × 3.54 in (203 × 90 mm)2.2 mm1,439 mm3Vinyl, card and thin sheet
12 × 5.3 in (305 × 135 mm)3.4 mm2,158 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More racing SVG files

← Sprint car racing with a top wing All 13 racing designs Drag racing dragster →