Racing car from the top view SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An open-wheel racing car seen from above, nose up the page: a needle nose with a stripe, a front and a back wing with end plates, four tyres on their arms and a helmet in the cockpit. Exactly mirrored.
What is in the file
| Size | 54 × 100 mm (2.13 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 926 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 150 curve and line segments |
| Symmetry | Mirror |
| Also found as | Race cars top view SVG |
Measured from the file. PNG: 1,115 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.54 × 1 in (14 × 25 mm) | 0.56 mm | 235 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 1.08 × 2 in (27 × 51 mm) | 1.1 mm | 470 mm | 45 | Vinyl, card and thin sheet |
| 1.62 × 3 in (41 × 76 mm) | 1.7 mm | 706 mm | 18 | Vinyl, card and thin sheet |
| 2.16 × 4 in (55 × 102 mm) | 2.2 mm | 941 mm | 10 | Vinyl, card and thin sheet |
| 3.24 × 6 in (82 × 152 mm) | 3.4 mm | 1,411 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.32 × 8 in (110 × 203 mm) | 4.5 mm | 1,882 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.48 × 12 in (165 × 305 mm) | 6.7 mm | 2,822 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More racing SVG files
-
Racing heartbeat line Solid · one piece -
Racing finish line with a chequered banner Solid · one piece -
Oval racing track from above Solid · one piece -
Racing helmet from the side Solid · one piece -
Racing car outline Outline · one piece -
Layered racing car in four colours Layered · 11 pieces -
Car racing with a chequered flag Solid · one piece -
Racing car silhouette on the track Solid · one piece
← Go kart racing with a driver All 13 racing designs Racing heartbeat line →