Free racing SVG

Racing car outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Racing car outline, drawn as a line
Racing car outline. The preview is the SVG file itself.

The stock car as an even line: body, spoiler and splitter in one outline, both side panes, a blank door roundel and each wheel as two rings joined by five spokes. For colouring and pen plotters.

What is in the file

Size100 × 43 mm (3.94 × 1.7 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length866 mm at this size
Narrowest part1.9 mm at this size
Nodes306 curve and line segments

Measured from the file. PNG: 2,000 × 908 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.48 mm220 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.97 mm440 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.3 in (76 × 33 mm)1.4 mm660 mm24Vinyl, card and thin sheet
4 × 1.73 in (102 × 44 mm)1.9 mm880 mm12Vinyl, card and thin sheet
6 × 2.59 in (152 × 66 mm)2.9 mm1,320 mm4Vinyl, card and thin sheet
8 × 3.46 in (203 × 88 mm)3.9 mm1,760 mm3Any material, including 3 mm wood and acrylic
12 × 5.18 in (305 × 132 mm)5.8 mm2,640 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More racing SVG files

← Racing helmet from the side All 13 racing designs Layered racing car in four colours →