Free racing SVG

Drag racing dragster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Drag racing dragster, as a solid black shape
Drag racing dragster. The preview is the SVG file itself.

A rail dragster: a long thin frame, a driver in a hoop cage, an engine with a scoop and four pipes, giant back slicks, tiny front wheels, a high wing on struts and a wheelie bar.

What is in the file

Size100 × 55 mm (3.94 × 2.17 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length678 mm at this size
Narrowest part1.1 mm at this size
Nodes190 curve and line segments

Measured from the file. PNG: 2,000 × 1,138 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.28 mm172 mm160Too fine for most machines
2 × 1.1 in (51 × 28 mm)0.56 mm344 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.66 in (76 × 42 mm)0.84 mm517 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.21 in (102 × 56 mm)1.1 mm689 mm10Vinyl, card and thin sheet
6 × 3.31 in (152 × 84 mm)1.7 mm1,033 mm3Vinyl, card and thin sheet
8 × 4.42 in (203 × 112 mm)2.2 mm1,378 mm2Vinyl, card and thin sheet
12 × 6.62 in (305 × 168 mm)3.4 mm2,067 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More racing SVG files

← Dirt modified racing car All 13 racing designs Go kart racing with a driver →