Free racing SVG

Oval racing track from above SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oval racing track from above, as a solid black shape
Oval racing track from above. The preview is the SVG file itself.

A speedway oval seen from the air: a broad band of track with a dashed centre line, a double start line across one straight and three cars cut out of the tarmac.

What is in the file

Size100 × 62 mm (3.94 × 2.44 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length800 mm at this size
Narrowest part1 mm at this size
Nodes139 curve and line segments
Also found asRace track SVG

Measured from the file. PNG: 2,000 × 1,269 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.25 mm203 mm140Too fine for most machines
2 × 1.24 in (51 × 31 mm)0.51 mm406 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.86 in (76 × 47 mm)0.76 mm610 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.48 in (102 × 63 mm)1 mm813 mm8Vinyl, card and thin sheet
6 × 3.72 in (152 × 94 mm)1.5 mm1,219 mm3Vinyl, card and thin sheet
8 × 4.96 in (203 × 126 mm)2 mm1,626 mm2Vinyl, card and thin sheet
12 × 7.44 in (305 × 189 mm)3 mm2,438 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More racing SVG files

← Racing finish line with a chequered banner All 13 racing designs Racing helmet from the side →