Free racing SVG

Racing helmet from the side SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Racing helmet from the side, as a solid black shape
Racing helmet from the side. The preview is the SVG file itself.

A full-face helmet facing right: an open visor port, two sweeping stripes over the crown, a pivot at the temple, three chin vents, a trim line round the base and a small lip at the back.

What is in the file

Size100 × 91 mm (3.94 × 3.59 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length944 mm at this size
Narrowest part1.3 mm at this size
Nodes90 curve and line segments

Measured from the file. PNG: 2,000 × 1,833 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.33 mm240 mm100Too fine for most machines
2 × 1.83 in (51 × 46 mm)0.66 mm480 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.74 in (76 × 70 mm)0.99 mm719 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.65 in (102 × 93 mm)1.3 mm959 mm6Vinyl, card and thin sheet
6 × 5.48 in (152 × 139 mm)2 mm1,439 mm2Vinyl, card and thin sheet
8 × 7.3 in (203 × 186 mm)2.6 mm1,918 mm1Vinyl, card and thin sheet
12 × 10.96 in (305 × 278 mm)4 mm2,877 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More racing SVG files

← Oval racing track from above All 13 racing designs Racing car outline →