Free racing SVG

Go kart racing with a driver SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Go kart racing with a driver, as a solid black shape
Go kart racing with a driver. The preview is the SVG file itself.

A racing kart from the side with its driver: a helmet with a visor slit, hands on a small wheel, legs stretched out to the pedals, a bucket seat, an engine at the back and four small tyres.

What is in the file

Size100 × 61 mm (3.94 × 2.39 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length584 mm at this size
Narrowest part2.9 mm at this size
Nodes128 curve and line segments

Measured from the file. PNG: 2,000 × 1,242 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.74 mm148 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.21 in (51 × 31 mm)1.5 mm297 mm40Vinyl, card and thin sheet
3 × 1.82 in (76 × 46 mm)2.2 mm445 mm18Vinyl, card and thin sheet
4 × 2.42 in (102 × 62 mm)2.9 mm593 mm8Vinyl, card and thin sheet
6 × 3.64 in (152 × 92 mm)4.4 mm890 mm3Any material, including 3 mm wood and acrylic
8 × 4.85 in (203 × 123 mm)5.9 mm1,187 mm2Any material, including 3 mm wood and acrylic
12 × 7.27 in (305 × 185 mm)8.8 mm1,780 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More racing SVG files

← Drag racing dragster All 13 racing designs Racing car from the top view →