Free racing SVG

Racing heartbeat line SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Racing heartbeat line, as a solid black shape
Racing heartbeat line. The preview is the SVG file itself.

A heartbeat trace that jumps once on each side of a stock car, which sits on the line as if it were the next beat. One piece, for a fan whose pulse runs at race speed.

What is in the file

Size100 × 40 mm (3.94 × 1.58 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length538 mm at this size
Narrowest part1.4 mm at this size
Nodes75 curve and line segments
Also found asRacing ekg SVG

Measured from the file. PNG: 2,000 × 848 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)0.36 mm137 mm200Too fine for most machines
2 × 0.8 in (51 × 20 mm)0.71 mm273 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.2 in (76 × 31 mm)1.1 mm410 mm24Vinyl, card and thin sheet
4 × 1.6 in (102 × 41 mm)1.4 mm547 mm12Vinyl, card and thin sheet
6 × 2.41 in (152 × 61 mm)2.1 mm820 mm4Vinyl, card and thin sheet
8 × 3.21 in (203 × 81 mm)2.8 mm1,093 mm3Vinyl, card and thin sheet
12 × 4.81 in (305 × 122 mm)4.3 mm1,640 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More racing SVG files

← Racing car from the top view All 13 racing designs Racing finish line with a chequered banner →