Free orchid SVG

Simple orchid with two buds SVG

Simple orchid with two buds, as a solid black shape — Simple orchid with two buds. The preview is the SVG file itself.

A plain bold flower with no veins and channels 2 mm wide, on a short curved stem that carries on past it to two round buds. For small stickers, felt and thin wood.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.61 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	15: 1 outer edge and 14 cut-outs
Cut length	766 mm at this size
Narrowest part	1.7 mm at this size
Nodes	288 curve and line segments

Measured from the file. PNG: 1,842 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	0.43 mm	195 mm	100	Too fine for most machines
1.84 × 2 in (47 × 51 mm)	0.86 mm	389 mm	25	Fine detail: vinyl and paper only, weed with care
2.75 × 3 in (70 × 76 mm)	1.3 mm	584 mm	12	Vinyl, card and thin sheet
3.67 × 4 in (93 × 102 mm)	1.7 mm	778 mm	6	Vinyl, card and thin sheet
5.51 × 6 in (140 × 152 mm)	2.6 mm	1,167 mm	2	Vinyl, card and thin sheet
7.34 × 8 in (187 × 203 mm)	3.5 mm	1,557 mm	1	Any material, including 3 mm wood and acrylic
11.02 × 12 in (280 × 305 mm)	5.2 mm	2,335 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Orchid flower, the face All 13 orchids Orchids on an arching stem →