Free orchid SVG

Orchid outline SVG

Orchid outline, drawn as a line — Orchid outline. The preview is the SVG file itself.

The flower as a line drawing: three sepals, two petals and the lip, every edge that shows drawn 1.8 mm wide and all of them joined. For colouring pages, embroidery, foil and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 87 mm (3.94 × 3.43 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,093 mm at this size
Narrowest part	1.9 mm at this size
Nodes	164 curve and line segments

Measured from the file. PNG: 2,000 × 1,752 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.87 in (25 × 22 mm)	0.48 mm	278 mm	110	Too fine for most machines
2 × 1.74 in (51 × 44 mm)	0.97 mm	555 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.61 in (76 × 66 mm)	1.4 mm	833 mm	12	Vinyl, card and thin sheet
4 × 3.48 in (102 × 88 mm)	1.9 mm	1,110 mm	6	Vinyl, card and thin sheet
6 × 5.23 in (152 × 133 mm)	2.9 mm	1,666 mm	2	Vinyl, card and thin sheet
8 × 6.97 in (203 × 177 mm)	3.9 mm	2,221 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.45 in (305 × 265 mm)	5.8 mm	3,331 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Orchid monogram frame All 13 orchids Orchid silhouette →