Free orchid SVG

Orchid monogram frame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Orchid monogram frame, as a solid black shape
Orchid monogram frame. The preview is the SVG file itself.

A ring with two flowers and a tail of buds resting on its lower right, and the rest left bare. A clean frame for one initial, a couple’s names or a table number.

What is in the file

Size83 × 100 mm (3.27 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut22: 1 outer edge and 21 cut-outs
Cut length893 mm at this size
Narrowest part1.1 mm at this size
Nodes364 curve and line segments

Measured from the file. PNG: 1,673 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.28 mm227 mm110Too fine for most machines
1.66 × 2 in (42 × 51 mm)0.56 mm454 mm30Fine detail: vinyl and paper only, weed with care
2.49 × 3 in (63 × 76 mm)0.84 mm680 mm12Fine detail: vinyl and paper only, weed with care
3.32 × 4 in (84 × 102 mm)1.1 mm907 mm6Vinyl, card and thin sheet
4.98 × 6 in (126 × 152 mm)1.7 mm1,361 mm2Vinyl, card and thin sheet
6.64 × 8 in (169 × 203 mm)2.2 mm1,815 mm1Vinyl, card and thin sheet
9.96 × 12 in (253 × 305 mm)3.4 mm2,722 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Orchid corner spray All 13 orchids Orchid outline →