Free orchid SVG

Orchid flower, the face SVG

Orchid flower, the face, as a solid black shape — Orchid flower, the face. The preview is the SVG file itself.

One moth orchid flower facing you: three slim sepals behind, two broad veined petals in front, and the small three-lobed lip with its pair of whiskers at the bottom. The three-and-three face that makes an orchid an orchid.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 87 mm (3.94 × 3.42 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	1,080 mm at this size
Narrowest part	2.1 mm at this size
Nodes	236 curve and line segments

Measured from the file. PNG: 2,000 × 1,748 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.87 in (25 × 22 mm)	0.53 mm	274 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.74 in (51 × 44 mm)	1.1 mm	549 mm	30	Vinyl, card and thin sheet
3 × 2.61 in (76 × 66 mm)	1.6 mm	823 mm	12	Vinyl, card and thin sheet
4 × 3.48 in (102 × 88 mm)	2.1 mm	1,097 mm	6	Vinyl, card and thin sheet
6 × 5.21 in (152 × 132 mm)	3.2 mm	1,646 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.95 in (203 × 177 mm)	4.3 mm	2,195 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.43 in (305 × 265 mm)	6.4 mm	3,292 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Layered orchid in five colours All 13 orchids Simple orchid with two buds →