Free orchid SVG

Two orchid flowers with leaves SVG

Two orchid flowers with leaves, as a solid black shape — Two orchid flowers with leaves. The preview is the SVG file itself.

A large flower with a smaller one tucked beside it and turned a little away, on two strap leaves. A ready-made pair for wedding stationery, spa labels and gift boxes.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 85 mm (3.94 × 3.33 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	27: 1 outer edge and 26 cut-outs
Cut length	1,155 mm at this size
Narrowest part	1.9 mm at this size
Nodes	434 curve and line segments

Measured from the file. PNG: 2,000 × 1,706 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 22 mm)	0.48 mm	293 mm	110	Too fine for most machines
2 × 1.69 in (51 × 43 mm)	0.97 mm	587 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.54 in (76 × 65 mm)	1.4 mm	880 mm	12	Vinyl, card and thin sheet
4 × 3.39 in (102 × 86 mm)	1.9 mm	1,173 mm	6	Vinyl, card and thin sheet
6 × 5.08 in (152 × 129 mm)	2.9 mm	1,760 mm	2	Vinyl, card and thin sheet
8 × 6.78 in (203 × 172 mm)	3.9 mm	2,347 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.16 in (305 × 258 mm)	5.8 mm	3,520 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Orchid stem in bud All 13 orchids Orchid corner spray →