Free orchid SVG

Orchid stem in bud SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Orchid stem in bud, as a solid black shape
Orchid stem in bud. The preview is the SVG file itself.

The tip of a flowering stem: one flower just open at the bottom and six buds beyond it, each smaller than the last, hanging on short stalks by turns. For the edge of a card or a slim bookmark.

What is in the file

Size100 × 91 mm (3.94 × 3.58 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length773 mm at this size
Narrowest part2 mm at this size
Nodes301 curve and line segments

Measured from the file. PNG: 2,000 × 1,827 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.51 mm196 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.82 in (51 × 46 mm)1 mm393 mm30Vinyl, card and thin sheet
3 × 2.73 in (76 × 69 mm)1.5 mm589 mm12Vinyl, card and thin sheet
4 × 3.64 in (102 × 92 mm)2 mm785 mm6Vinyl, card and thin sheet
6 × 5.46 in (152 × 139 mm)3 mm1,178 mm2Any material, including 3 mm wood and acrylic
8 × 7.28 in (203 × 185 mm)4.1 mm1,571 mm1Any material, including 3 mm wood and acrylic
12 × 10.92 in (305 × 277 mm)6.1 mm2,356 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Orchid plant in a pot All 13 orchids Two orchid flowers with leaves →