Free orchid SVG

Orchid corner spray SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Orchid corner spray, as a solid black shape
Orchid corner spray. The preview is the SVG file itself.

A stem that climbs one edge and arches over along the other, with three flowers and a run of buds. For the top corner of an invitation, a menu or a certificate.

What is in the file

Size98 × 100 mm (3.85 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut28: 1 outer edge and 27 cut-outs
Cut length933 mm at this size
Narrowest part1.1 mm at this size
Nodes492 curve and line segments

Measured from the file. PNG: 1,960 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.28 mm237 mm100Too fine for most machines
1.96 × 2 in (50 × 51 mm)0.56 mm474 mm25Fine detail: vinyl and paper only, weed with care
2.94 × 3 in (75 × 76 mm)0.84 mm711 mm9Fine detail: vinyl and paper only, weed with care
3.92 × 4 in (99 × 102 mm)1.1 mm948 mm4Vinyl, card and thin sheet
5.87 × 6 in (149 × 152 mm)1.7 mm1,422 mm2Vinyl, card and thin sheet
7.83 × 8 in (199 × 203 mm)2.2 mm1,896 mm1Vinyl, card and thin sheet
11.75 × 12 in (298 × 305 mm)3.4 mm2,844 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Two orchid flowers with leaves All 13 orchids Orchid monogram frame →