Free orchid SVG

Orchids on an arching stem SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Orchids on an arching stem, as a solid black shape
Orchids on an arching stem. The preview is the SVG file itself.

A stem that rises and bends over under its own flowers: four open orchids, the largest lowest, and three round buds at the tip. The line of a moth orchid in bloom, without the pot.

What is in the file

Size84 × 100 mm (3.32 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut34: 1 outer edge and 33 cut-outs
Cut length848 mm at this size
Narrowest part1.1 mm at this size
Nodes521 curve and line segments

Measured from the file. PNG: 1,700 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.28 mm215 mm110Too fine for most machines
1.69 × 2 in (43 × 51 mm)0.56 mm431 mm30Fine detail: vinyl and paper only, weed with care
2.53 × 3 in (64 × 76 mm)0.84 mm646 mm12Fine detail: vinyl and paper only, weed with care
3.38 × 4 in (86 × 102 mm)1.1 mm862 mm6Vinyl, card and thin sheet
5.06 × 6 in (129 × 152 mm)1.7 mm1,292 mm2Vinyl, card and thin sheet
6.75 × 8 in (172 × 203 mm)2.2 mm1,723 mm1Vinyl, card and thin sheet
10.13 × 12 in (257 × 305 mm)3.4 mm2,585 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More orchid SVG files

← Simple orchid with two buds All 13 orchids Orchid plant in a pot →