Free mouse SVG

Mouse hole with a mouse SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mouse hole with a mouse, as a solid black shape
Mouse hole with a mouse. The preview is the SVG file itself.

A round-topped mouse hole and a mouse setting off from it along a strip of floor. Cut it in black vinyl at about 150 mm wide and stick it on a skirting board.

What is in the file

Size100 × 52 mm (3.94 × 2.06 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length415 mm at this size
Narrowest part1.8 mm at this size
Nodes106 curve and line segments

Measured from the file. PNG: 2,000 × 1,081 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.52 in (25 × 13 mm)0.46 mm105 mm160Too fine for most machines
2 × 1.04 in (51 × 27 mm)0.91 mm211 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.57 in (76 × 40 mm)1.4 mm316 mm18Vinyl, card and thin sheet
4 × 2.09 in (102 × 53 mm)1.8 mm422 mm10Vinyl, card and thin sheet
6 × 3.13 in (152 × 80 mm)2.7 mm632 mm3Vinyl, card and thin sheet
8 × 4.18 in (203 × 106 mm)3.7 mm843 mm2Any material, including 3 mm wood and acrylic
12 × 6.26 in (305 × 159 mm)5.5 mm1,265 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mouse nose and whiskers All 16 mice Mouse door for a skirting board →