Free mouse SVG

Mouse door for a skirting board SVG

Mouse door for a skirting board, as a solid black shape
Mouse door for a skirting board. The preview is the SVG file itself.

A tiny arched door for the mouse that lives in the wall: three planks, two strap hinges, a round window with a cross bar, a knob and a step. One piece, about 60 mm wide at full size.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size74 × 100 mm (2.92 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length1,256 mm at this size
Narrowest part2.1 mm at this size
Nodes203 curve and line segments

Measured from the file. PNG: 1,504 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.53 mm319 mm120Fine detail: vinyl and paper only, weed with care
1.48 × 2 in (38 × 51 mm)1.1 mm638 mm35Vinyl, card and thin sheet
2.23 × 3 in (57 × 76 mm)1.6 mm957 mm15Vinyl, card and thin sheet
2.97 × 4 in (75 × 102 mm)2.1 mm1,276 mm6Vinyl, card and thin sheet
4.45 × 6 in (113 × 152 mm)3.2 mm1,914 mm2Any material, including 3 mm wood and acrylic
5.94 × 8 in (151 × 203 mm)4.3 mm2,552 mm1Any material, including 3 mm wood and acrylic
8.9 × 12 in (226 × 305 mm)6.4 mm3,828 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mouse hole with a mouse All 16 mice Christmas mouse in a hat →