Free mouse SVG

Layered mouse with cheese in four colours SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Layered mouse with cheese in four colours, in layered colours
Layered mouse with cheese in four colours. The preview is the SVG file itself.

Four layers to stack: a yellow wedge of cheese, a grey mouse sniffing at it, the pink ear, feet, nose and tail, and a dark eye on top. Cut each from its own colour of card or vinyl.

What is in the file

Size100 × 37 mm (3.94 × 1.45 in), scales to any size
Pieces8 separate pieces
Outlines to cut11: 8 outer edges and 3 cut-outs
Cut length514 mm at this size
Narrowest part1.4 mm at this size
Nodes167 curve and line segments
Layers4: cheese, mouse, ear, feet, nose and tail and eye

Measured from the file. PNG: 2,000 × 785 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.36 mm131 mm210Too fine for most machines
2 × 0.74 in (51 × 19 mm)0.71 mm261 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.1 in (76 × 28 mm)1.1 mm392 mm27Vinyl, card and thin sheet
4 × 1.47 in (102 × 37 mm)1.4 mm522 mm14Vinyl, card and thin sheet
6 × 2.21 in (152 × 56 mm)2.1 mm783 mm5Vinyl, card and thin sheet
8 × 2.94 in (203 × 75 mm)2.8 mm1,044 mm3Vinyl, card and thin sheet
12 × 4.42 in (305 × 112 mm)4.3 mm1,567 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mouse outline drawing All 16 mice Mouse silhouette →