Free mouse SVG

Mouse outline drawing SVG

Mouse outline drawing, drawn as a line — Mouse outline drawing. The preview is the SVG file itself.

The standing mouse drawn as one even line about 2 mm wide, with the ear drawn inside the head and a dot for the eye. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 51 mm (3.94 × 2.02 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	572 mm at this size
Narrowest part	1.8 mm at this size
Nodes	190 curve and line segments

Measured from the file. PNG: 2,000 × 1,063 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.51 in (25 × 13 mm)	0.46 mm	145 mm	170	Too fine for most machines
2 × 1.03 in (51 × 26 mm)	0.91 mm	291 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.54 in (76 × 39 mm)	1.4 mm	436 mm	21	Vinyl, card and thin sheet
4 × 2.05 in (102 × 52 mm)	1.8 mm	581 mm	10	Vinyl, card and thin sheet
6 × 3.08 in (152 × 78 mm)	2.7 mm	872 mm	3	Vinyl, card and thin sheet
8 × 4.1 in (203 × 104 mm)	3.7 mm	1,162 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.16 in (305 × 156 mm)	5.5 mm	1,743 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mouse monogram frame All 16 mice Layered mouse with cheese in four colours →