Free mouse SVG

Mouse monogram frame SVG

Mouse monogram frame, as a solid black shape
Mouse monogram frame. The preview is the SVG file itself.

A round frame with a mouse walking along the top of it and its tail hanging down inside. The middle is empty for an initial or a short name: add it so that it touches the ring, and weld.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size72 × 100 mm (2.85 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length594 mm at this size
Narrowest part2.1 mm at this size
Nodes117 curve and line segments

Measured from the file. PNG: 1,467 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.53 mm151 mm130Fine detail: vinyl and paper only, weed with care
1.45 × 2 in (37 × 51 mm)1.1 mm302 mm35Vinyl, card and thin sheet
2.17 × 3 in (55 × 76 mm)1.6 mm453 mm15Vinyl, card and thin sheet
2.89 × 4 in (73 × 102 mm)2.1 mm604 mm6Vinyl, card and thin sheet
4.34 × 6 in (110 × 152 mm)3.2 mm905 mm2Any material, including 3 mm wood and acrylic
5.78 × 8 in (147 × 203 mm)4.3 mm1,207 mm2Any material, including 3 mm wood and acrylic
8.68 × 12 in (220 × 305 mm)6.4 mm1,811 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mouse with a heart tail All 16 mice Mouse outline drawing →