Free mouse SVG

Mouse with a heart tail SVG

Mouse with a heart tail, as a solid black shape — Mouse with a heart tail. The preview is the SVG file itself.

The standing mouse with its long tail looped into a heart above its back. An eye and an ear are cut in. For Valentine cards, wedding favours and a small gift tag.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	529 mm at this size
Narrowest part	2.4 mm at this size
Nodes	168 curve and line segments

Measured from the file. PNG: 2,000 × 1,327 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 17 mm)	0.61 mm	134 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.3 in (51 × 33 mm)	1.2 mm	269 mm	40	Vinyl, card and thin sheet
3 × 1.95 in (76 × 50 mm)	1.8 mm	403 mm	15	Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)	2.4 mm	537 mm	8	Vinyl, card and thin sheet
6 × 3.9 in (152 × 99 mm)	3.7 mm	806 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.2 in (203 × 132 mm)	4.9 mm	1,075 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.8 in (305 × 198 mm)	7.3 mm	1,612 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mama mouse with her baby All 16 mice Mouse monogram frame →