Free mouse SVG

Mouse nose and whiskers SVG

Mouse nose and whiskers, as a solid black shape
Mouse nose and whiskers. The preview is the SVG file itself.

Only the nose, the whiskers and two front teeth, joined in one piece. Cut it small for a face mask or a mug, or large from felt for a costume and a school play.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 34 mm (3.94 × 1.35 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length565 mm at this size
Narrowest part3.4 mm at this size
Nodes56 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 735 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.34 in (25 × 9 mm)0.86 mm144 mm220Fine detail: vinyl and paper only, weed with care
2 × 0.68 in (51 × 17 mm)1.7 mm287 mm65Vinyl, card and thin sheet
3 × 1.03 in (76 × 26 mm)2.6 mm431 mm27Vinyl, card and thin sheet
4 × 1.37 in (102 × 35 mm)3.5 mm574 mm14Any material, including 3 mm wood and acrylic
6 × 2.05 in (152 × 52 mm)5.2 mm861 mm5Any material, including 3 mm wood and acrylic
8 × 2.74 in (203 × 69 mm)6.9 mm1,148 mm4Any material, including 3 mm wood and acrylic
12 × 4.1 in (305 × 104 mm)10 mm1,722 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mouse face with whiskers All 16 mice Mouse hole with a mouse →