Free mouse SVG

Christmas mouse in a hat SVG

Christmas mouse in a hat, as a solid black shape
Christmas mouse in a hat. The preview is the SVG file itself.

The sitting mouse in a Father Christmas hat with a bobble, holding a small wrapped present in its paws. The fur band of the hat is cut out in three parts and the ribbon of the present as a cross.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.92 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length708 mm at this size
Narrowest part2.1 mm at this size
Nodes281 curve and line segments

Measured from the file. PNG: 2,000 × 1,990 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.53 mm180 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.99 in (51 × 51 mm)1.1 mm360 mm25Vinyl, card and thin sheet
3 × 2.99 in (76 × 76 mm)1.6 mm539 mm9Vinyl, card and thin sheet
4 × 3.98 in (102 × 101 mm)2.1 mm719 mm4Vinyl, card and thin sheet
6 × 5.97 in (152 × 152 mm)3.2 mm1,079 mm1Any material, including 3 mm wood and acrylic
8 × 7.96 in (203 × 202 mm)4.3 mm1,439 mm1Any material, including 3 mm wood and acrylic
12 × 11.94 in (305 × 303 mm)6.4 mm2,158 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mouse SVG files

← Mouse door for a skirting board All 16 mice Mouse with a balloon →