Free Lucky SVG

Lucky with stars SVG

Lucky with stars, as a solid black shape — Lucky with stars. The preview is the SVG file itself.

“Lucky” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.96 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	9: 8 outer edges and 1 cut-out
Cut length	911 mm at this size
Narrowest part	1.7 mm at this size
Nodes	252 curve and line segments

Measured from the file. PNG: 2,000 × 1,521 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.43 mm	231 mm	120	Too fine for most machines
2 × 1.5 in (51 × 38 mm)	0.86 mm	463 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.25 in (76 × 57 mm)	1.3 mm	694 mm	12	Vinyl, card and thin sheet
4 × 3 in (102 × 76 mm)	1.7 mm	926 mm	6	Vinyl, card and thin sheet
6 × 4.51 in (152 × 114 mm)	2.6 mm	1,388 mm	2	Vinyl, card and thin sheet
8 × 6.01 in (203 × 153 mm)	3.5 mm	1,851 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.01 in (305 × 229 mm)	5.2 mm	2,777 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky SVG files

← Lucky with a swash underline All 12 Lucky designs Lucky outline lettering →