Free Lucky SVG

Lucky with a four-leaf clover SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky with a four-leaf clover, as a solid black shape — Lucky with a four-leaf clover. The preview is the SVG file itself.

“Lucky” with a four-leaf clover above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 91 mm (3.94 × 3.58 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	4: 3 outer edges and 1 cut-out
Cut length	917 mm at this size
Narrowest part	1.7 mm at this size
Nodes	166 curve and line segments

Measured from the file. PNG: 2,000 × 1,825 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.91 in (25 × 23 mm)	0.43 mm	233 mm	110	Too fine for most machines
2 × 1.82 in (51 × 46 mm)	0.86 mm	466 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.73 in (76 × 69 mm)	1.3 mm	699 mm	12	Vinyl, card and thin sheet
4 × 3.64 in (102 × 92 mm)	1.7 mm	932 mm	6	Vinyl, card and thin sheet
6 × 5.45 in (152 × 139 mm)	2.6 mm	1,398 mm	2	Vinyl, card and thin sheet
8 × 7.27 in (203 × 185 mm)	3.5 mm	1,863 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.91 in (305 × 277 mm)	5.2 mm	2,795 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky SVG files

← Lucky with a drop shadow All 13 Lucky designs Lucky in Pacifico →