Lucky in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Lucky” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 37 mm (3.94 × 1.47 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 5 outlines |
| Cut length | 504 mm at this size |
| Narrowest part | 4.9 mm at this size |
| Nodes | 108 curve and line segments |
Measured from the file. PNG: 2,000 × 794 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.37 in (25 × 9 mm) | 1.2 mm | 128 mm | 210 | Vinyl, card and thin sheet |
| 2 × 0.75 in (51 × 19 mm) | 2.5 mm | 256 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.12 in (76 × 28 mm) | 3.7 mm | 384 mm | 27 | Any material, including 3 mm wood and acrylic |
| 4 × 1.49 in (102 × 38 mm) | 5 mm | 512 mm | 14 | Any material, including 3 mm wood and acrylic |
| 6 × 2.24 in (152 × 57 mm) | 7.5 mm | 768 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.98 in (203 × 76 mm) | 10 mm | 1,024 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.48 in (305 × 114 mm) | 15 mm | 1,536 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Lucky SVG files
-
Lucky in Alfa Slab One Solid · 5 pieces
-
Lucky in Amatic SC Solid · 5 pieces
-
Lucky in block capitals Solid · 5 pieces
-
Lucky with a swash underline Solid · 2 pieces
-
Lucky with stars Solid · 8 pieces
-
Lucky outline lettering Outline · 5 pieces
-
Lucky stencil plate Solid · one piece
-
Lucky with a drop shadow Layered · 2 pieces
← Lucky in Kaushan Script All 13 Lucky designs Lucky in Alfa Slab One →