Free Lucky SVG

Lucky stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky stencil plate, as a solid black shape
Lucky stencil plate. The preview is the SVG file itself.

A rounded plate with “LUCKY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length771 mm at this size
Narrowest part4.2 mm at this size
Nodes111 curve and line segments

Measured from the file. PNG: 2,000 × 902 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)1.1 mm196 mm190Vinyl, card and thin sheet
2 × 0.86 in (51 × 22 mm)2.1 mm392 mm55Vinyl, card and thin sheet
3 × 1.29 in (76 × 33 mm)3.2 mm588 mm24Any material, including 3 mm wood and acrylic
4 × 1.72 in (102 × 44 mm)4.3 mm783 mm12Any material, including 3 mm wood and acrylic
6 × 2.57 in (152 × 65 mm)6.4 mm1,175 mm4Any material, including 3 mm wood and acrylic
8 × 3.43 in (203 × 87 mm)8.5 mm1,567 mm3Any material, including 3 mm wood and acrylic
12 × 5.15 in (305 × 131 mm)13 mm2,350 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky SVG files

← Lucky outline lettering All 13 Lucky designs Lucky with a drop shadow →