Lucky in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Lucky” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 31 mm (3.94 × 1.23 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 5 outlines |
| Cut length | 513 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 96 curve and line segments |
Measured from the file. PNG: 2,000 × 679 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.31 in (25 × 8 mm) | 0.84 mm | 130 mm | 230 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.63 in (51 × 16 mm) | 1.7 mm | 261 mm | 70 | Vinyl, card and thin sheet |
| 3 × 0.94 in (76 × 24 mm) | 2.5 mm | 391 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.25 in (102 × 32 mm) | 3.4 mm | 521 mm | 16 | Any material, including 3 mm wood and acrylic |
| 6 × 1.88 in (152 × 48 mm) | 5 mm | 782 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.5 in (203 × 64 mm) | 6.7 mm | 1,042 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.76 in (305 × 95 mm) | 10 mm | 1,564 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Lucky SVG files
-
Lucky in Amatic SC Solid · 5 pieces
-
Lucky in block capitals Solid · 5 pieces
-
Lucky with a swash underline Solid · 2 pieces
-
Lucky with stars Solid · 8 pieces
-
Lucky outline lettering Outline · 5 pieces
-
Lucky stencil plate Solid · one piece
-
Lucky with a drop shadow Layered · 2 pieces
-
Lucky with a four-leaf clover Solid · 3 pieces
← Lucky in Lilita One All 13 Lucky designs Lucky in Amatic SC →