Lucky with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Lucky” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.12 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 8: 2 outer edges and 6 cut-outs |
| Cut length | 1,127 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 282 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,113 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.46 mm | 286 mm | 160 | Too fine for most machines |
| 2 × 1.08 in (51 × 27 mm) | 0.91 mm | 573 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.62 in (76 × 41 mm) | 1.4 mm | 859 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.16 in (102 × 55 mm) | 1.8 mm | 1,145 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.23 in (152 × 82 mm) | 2.7 mm | 1,718 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.31 in (203 × 110 mm) | 3.7 mm | 2,290 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.47 in (305 × 164 mm) | 5.5 mm | 3,435 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Lucky SVG files
-
Lucky with a four-leaf clover Solid · 3 pieces
-
Lucky in Pacifico Solid · one piece
-
Lucky in Lobster Solid · 2 pieces
-
Lucky in Kaushan Script Solid · 5 pieces
-
Lucky in Lilita One Solid · 5 pieces
-
Lucky in Alfa Slab One Solid · 5 pieces
-
Lucky in Amatic SC Solid · 5 pieces
-
Lucky in block capitals Solid · 5 pieces
← Lucky stencil plate All 13 Lucky designs Lucky with a four-leaf clover →