Free Lucky SVG

Lucky in Pacifico SVG

Lucky in Pacifico, as a solid black shape — Lucky in Pacifico. The preview is the SVG file itself.

“Lucky” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 53 mm (3.94 × 2.07 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	641 mm at this size
Narrowest part	2.7 mm at this size
Nodes	216 curve and line segments

Measured from the file. PNG: 2,000 × 1,087 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.53 in (25 × 13 mm)	0.69 mm	163 mm	160	Fine detail: vinyl and paper only, weed with care
2 × 1.05 in (51 × 27 mm)	1.4 mm	326 mm	45	Vinyl, card and thin sheet
3 × 1.58 in (76 × 40 mm)	2.1 mm	488 mm	18	Vinyl, card and thin sheet
4 × 2.1 in (102 × 53 mm)	2.7 mm	651 mm	10	Vinyl, card and thin sheet
6 × 3.15 in (152 × 80 mm)	4.1 mm	977 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.2 in (203 × 107 mm)	5.5 mm	1,303 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.3 in (305 × 160 mm)	8.2 mm	1,954 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky SVG files

← Lucky with a drop shadow All 12 Lucky designs Lucky in Lobster →