Lucky with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Lucky” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.38 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 4: 2 outer edges and 2 cut-outs |
| Cut length | 823 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 220 curve and line segments |
Measured from the file. PNG: 2,000 × 1,240 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 15 mm) | 0.66 mm | 209 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.21 in (51 × 31 mm) | 1.3 mm | 418 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.81 in (76 × 46 mm) | 2 mm | 627 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.42 in (102 × 61 mm) | 2.6 mm | 836 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.63 in (152 × 92 mm) | 4 mm | 1,254 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.84 in (203 × 123 mm) | 5.3 mm | 1,672 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.26 in (305 × 184 mm) | 7.9 mm | 2,509 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Lucky SVG files
-
Lucky with stars Solid · 8 pieces
-
Lucky outline lettering Outline · 5 pieces
-
Lucky stencil plate Solid · one piece
-
Lucky with a drop shadow Layered · 2 pieces
-
Lucky with a four-leaf clover Solid · 3 pieces
-
Lucky in Pacifico Solid · one piece
-
Lucky in Lobster Solid · 2 pieces
-
Lucky in Kaushan Script Solid · 5 pieces
← Lucky in block capitals All 13 Lucky designs Lucky with stars →