Free Lucky SVG

Lucky in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky in Lobster, as a solid black shape
Lucky in Lobster. The preview is the SVG file itself.

“Lucky” set in Lobster, a bold upright script. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces2 separate pieces
Outlines to cut3: 2 outer edges and 1 cut-out
Cut length677 mm at this size
Narrowest part1.7 mm at this size
Nodes133 curve and line segments

Measured from the file. PNG: 2,000 × 902 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.43 mm172 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.86 mm344 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.29 in (76 × 33 mm)1.3 mm516 mm24Vinyl, card and thin sheet
4 × 1.72 in (102 × 44 mm)1.7 mm688 mm12Vinyl, card and thin sheet
6 × 2.57 in (152 × 65 mm)2.6 mm1,032 mm4Vinyl, card and thin sheet
8 × 3.43 in (203 × 87 mm)3.5 mm1,376 mm3Any material, including 3 mm wood and acrylic
12 × 5.15 in (305 × 131 mm)5.2 mm2,063 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky SVG files

← Lucky in Pacifico All 13 Lucky designs Lucky in Kaushan Script →