Free Lucky Charm SVG

Lucky Charm in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky Charm in Alfa Slab One, as a solid black shape
Lucky Charm in Alfa Slab One. The preview is the SVG file itself.

“Lucky Charm” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 56 mm (3.94 × 2.2 in), scales to any size
Pieces10 separate pieces
Outlines to cut11: 10 outer edges and 1 cut-out
Cut length968 mm at this size
Narrowest part2.5 mm at this size
Nodes221 curve and line segments

Measured from the file. PNG: 2,000 × 1,152 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.64 mm246 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.12 in (51 × 28 mm)1.3 mm492 mm45Vinyl, card and thin sheet
3 × 1.68 in (76 × 43 mm)1.9 mm738 mm18Vinyl, card and thin sheet
4 × 2.24 in (102 × 57 mm)2.5 mm983 mm10Vinyl, card and thin sheet
6 × 3.35 in (152 × 85 mm)3.8 mm1,475 mm3Any material, including 3 mm wood and acrylic
8 × 4.47 in (203 × 114 mm)5.1 mm1,967 mm2Any material, including 3 mm wood and acrylic
12 × 6.71 in (305 × 170 mm)7.6 mm2,950 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm in Lilita One All 13 Lucky Charm designs Lucky Charm in Amatic SC →