Free Lucky Charm SVG

Lucky Charm in block capitals SVG

Lucky Charm in block capitals, as a solid black shape
Lucky Charm in block capitals. The preview is the SVG file itself.

“LUCKY CHARM” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 79 mm (3.94 × 3.11 in), scales to any size
Pieces10 separate pieces
Outlines to cut12: 10 outer edges and 2 cut-outs
Cut length1,550 mm at this size
Narrowest part3.4 mm at this size
Nodes149 curve and line segments

Measured from the file. PNG: 2,000 × 1,594 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.86 mm394 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.58 in (51 × 40 mm)1.7 mm787 mm30Vinyl, card and thin sheet
3 × 2.37 in (76 × 60 mm)2.6 mm1,181 mm12Vinyl, card and thin sheet
4 × 3.16 in (102 × 80 mm)3.5 mm1,575 mm6Any material, including 3 mm wood and acrylic
6 × 4.73 in (152 × 120 mm)5.2 mm2,362 mm2Any material, including 3 mm wood and acrylic
8 × 6.31 in (203 × 160 mm)6.9 mm3,150 mm1Any material, including 3 mm wood and acrylic
12 × 9.47 in (305 × 240 mm)10 mm4,724 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm in Amatic SC All 12 Lucky Charm designs Lucky Charm in script and capitals →