Free Lucky Charm SVG

Lucky Charm stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky Charm stencil plate, as a solid black shape
Lucky Charm stencil plate. The preview is the SVG file itself.

A rounded plate with “LUCKY CHARM” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 75 mm (3.94 × 2.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,416 mm at this size
Narrowest part1.5 mm at this size
Nodes253 curve and line segments

Measured from the file. PNG: 2,000 × 1,515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.38 mm360 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.76 mm719 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)1.1 mm1,079 mm12Vinyl, card and thin sheet
4 × 2.99 in (102 × 76 mm)1.5 mm1,439 mm6Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)2.3 mm2,158 mm2Vinyl, card and thin sheet
8 × 5.98 in (203 × 152 mm)3 mm2,877 mm1Any material, including 3 mm wood and acrylic
12 × 8.98 in (305 × 228 mm)4.6 mm4,316 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm outline lettering All 13 Lucky Charm designs Lucky Charm with a drop shadow →