Lucky Charm with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Lucky Charm” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.53 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 12: 4 outer edges and 8 cut-outs |
| Cut length | 1,976 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 519 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,802 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.66 mm | 502 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.79 in (51 × 46 mm) | 1.3 mm | 1,004 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.69 in (76 × 68 mm) | 2 mm | 1,506 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.59 in (102 × 91 mm) | 2.6 mm | 2,008 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.38 in (152 × 137 mm) | 4 mm | 3,011 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.18 in (203 × 182 mm) | 5.3 mm | 4,015 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.76 in (305 × 273 mm) | 7.9 mm | 6,023 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Lucky Charm SVG files
-
Lucky Charm with a four-leaf clover Solid · 7 pieces
-
Lucky Charm in Pacifico Solid · 2 pieces
-
Lucky Charm in Lobster Solid · 4 pieces
-
Lucky Charm in Kaushan Script Solid · 10 pieces
-
Lucky Charm in Lilita One Solid · 10 pieces
-
Lucky Charm in Alfa Slab One Solid · 10 pieces
-
Lucky Charm in Amatic SC Solid · 10 pieces
-
Lucky Charm in block capitals Solid · 10 pieces
← Lucky Charm stencil plate All 13 Lucky Charm designs Lucky Charm with a four-leaf clover →