Free Lucky Charm SVG

Lucky Charm in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky Charm in Lilita One, as a solid black shape
Lucky Charm in Lilita One. The preview is the SVG file itself.

“Lucky Charm” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 67 mm (3.94 × 2.64 in), scales to any size
Pieces10 separate pieces
Outlines to cut11: 10 outer edges and 1 cut-out
Cut length935 mm at this size
Narrowest part3.8 mm at this size
Nodes225 curve and line segments

Measured from the file. PNG: 2,000 × 1,365 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.97 mm237 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.34 in (51 × 34 mm)1.9 mm475 mm35Vinyl, card and thin sheet
3 × 2.01 in (76 × 51 mm)2.9 mm712 mm15Vinyl, card and thin sheet
4 × 2.68 in (102 × 68 mm)3.9 mm950 mm8Any material, including 3 mm wood and acrylic
6 × 4.02 in (152 × 102 mm)5.8 mm1,425 mm2Any material, including 3 mm wood and acrylic
8 × 5.36 in (203 × 136 mm)7.7 mm1,900 mm2Any material, including 3 mm wood and acrylic
12 × 8.04 in (305 × 204 mm)12 mm2,850 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm in Kaushan Script All 13 Lucky Charm designs Lucky Charm in Alfa Slab One →