Free Lucky Charm SVG

Lucky Charm in Amatic SC SVG

Lucky Charm in Amatic SC, as a solid black shape
Lucky Charm in Amatic SC. The preview is the SVG file itself.

“Lucky Charm” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces10 separate pieces
Outlines to cut12: 10 outer edges and 2 cut-outs
Cut length1,442 mm at this size
Narrowest part1.5 mm at this size
Nodes458 curve and line segments

Measured from the file. PNG: 1,681 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.38 mm366 mm110Too fine for most machines
1.67 × 2 in (42 × 51 mm)0.76 mm733 mm30Fine detail: vinyl and paper only, weed with care
2.5 × 3 in (64 × 76 mm)1.1 mm1,099 mm12Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)1.5 mm1,465 mm6Vinyl, card and thin sheet
5 × 6 in (127 × 152 mm)2.3 mm2,198 mm2Vinyl, card and thin sheet
6.67 × 8 in (169 × 203 mm)3 mm2,930 mm1Any material, including 3 mm wood and acrylic
10.01 × 12 in (254 × 305 mm)4.6 mm4,395 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm in Alfa Slab One All 12 Lucky Charm designs Lucky Charm in block capitals →