Free Lucky Charm SVG

Lucky Charm with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky Charm with stars, as a solid black shape
Lucky Charm with stars. The preview is the SVG file itself.

“Lucky Charm” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size88 × 100 mm (3.46 × 3.94 in), scales to any size
Pieces10 separate pieces
Outlines to cut12: 10 outer edges and 2 cut-outs
Cut length1,205 mm at this size
Narrowest part1.4 mm at this size
Nodes306 curve and line segments

Measured from the file. PNG: 1,769 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.88 × 1 in (22 × 25 mm)0.36 mm306 mm110Too fine for most machines
1.76 × 2 in (45 × 51 mm)0.71 mm612 mm30Fine detail: vinyl and paper only, weed with care
2.64 × 3 in (67 × 76 mm)1.1 mm918 mm12Vinyl, card and thin sheet
3.52 × 4 in (89 × 102 mm)1.4 mm1,224 mm6Vinyl, card and thin sheet
5.28 × 6 in (134 × 152 mm)2.1 mm1,836 mm2Vinyl, card and thin sheet
7.04 × 8 in (179 × 203 mm)2.8 mm2,449 mm1Vinyl, card and thin sheet
10.56 × 12 in (268 × 305 mm)4.3 mm3,673 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm in script and capitals All 13 Lucky Charm designs Lucky Charm outline lettering →