Free Lucky Charm SVG

Lucky Charm in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lucky Charm in Lobster, as a solid black shape
Lucky Charm in Lobster. The preview is the SVG file itself.

“Lucky Charm” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 81 mm (3.94 × 3.2 in), scales to any size
Pieces4 separate pieces
Outlines to cut6: 4 outer edges and 2 cut-outs
Cut length1,132 mm at this size
Narrowest part1.4 mm at this size
Nodes258 curve and line segments

Measured from the file. PNG: 2,000 × 1,642 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.81 in (25 × 21 mm)0.36 mm288 mm120Too fine for most machines
2 × 1.63 in (51 × 41 mm)0.71 mm575 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.44 in (76 × 62 mm)1.1 mm863 mm12Vinyl, card and thin sheet
4 × 3.26 in (102 × 83 mm)1.4 mm1,150 mm6Vinyl, card and thin sheet
6 × 4.88 in (152 × 124 mm)2.1 mm1,725 mm2Vinyl, card and thin sheet
8 × 6.51 in (203 × 165 mm)2.8 mm2,300 mm1Vinyl, card and thin sheet
12 × 9.77 in (305 × 248 mm)4.3 mm3,450 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm in Pacifico All 13 Lucky Charm designs Lucky Charm in Kaushan Script →