Free Lucky Charm SVG

Lucky Charm outline lettering SVG

Lucky Charm outline lettering, drawn as a line — Lucky Charm outline lettering. The preview is the SVG file itself.

“Lucky Charm” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.54 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	23: 11 outer edges and 12 cut-outs
Cut length	1,650 mm at this size
Narrowest part	1.4 mm at this size
Nodes	396 curve and line segments

Measured from the file. PNG: 2,000 × 1,317 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 16 mm)	0.36 mm	419 mm	140	Too fine for most machines
2 × 1.29 in (51 × 33 mm)	0.71 mm	838 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.93 in (76 × 49 mm)	1.1 mm	1,257 mm	15	Vinyl, card and thin sheet
4 × 2.58 in (102 × 66 mm)	1.4 mm	1,676 mm	8	Vinyl, card and thin sheet
6 × 3.87 in (152 × 98 mm)	2.1 mm	2,515 mm	2	Vinyl, card and thin sheet
8 × 5.16 in (203 × 131 mm)	2.8 mm	3,353 mm	2	Vinyl, card and thin sheet
12 × 7.74 in (305 × 197 mm)	4.3 mm	5,029 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Lucky Charm SVG files

← Lucky Charm with stars All 12 Lucky Charm designs Lucky Charm stencil plate →