Free Let’s Get Basted SVG

Let’s Get Basted with stars SVG

Let’s Get Basted with stars, as a solid black shape — Let’s Get Basted with stars. The preview is the SVG file itself.

“Let’s Get Basted” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	98 × 100 mm (3.84 × 3.94 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	21: 14 outer edges and 7 cut-outs
Cut length	1,427 mm at this size
Narrowest part	1.3 mm at this size
Nodes	528 curve and line segments

Measured from the file. PNG: 1,954 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	0.33 mm	362 mm	100	Too fine for most machines
1.95 × 2 in (50 × 51 mm)	0.66 mm	725 mm	25	Fine detail: vinyl and paper only, weed with care
2.93 × 3 in (74 × 76 mm)	0.99 mm	1,087 mm	9	Fine detail: vinyl and paper only, weed with care
3.9 × 4 in (99 × 102 mm)	1.3 mm	1,450 mm	4	Vinyl, card and thin sheet
5.86 × 6 in (149 × 152 mm)	2 mm	2,175 mm	2	Vinyl, card and thin sheet
7.81 × 8 in (198 × 203 mm)	2.6 mm	2,900 mm	1	Vinyl, card and thin sheet
11.71 × 12 in (297 × 305 mm)	4 mm	4,349 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Get Basted SVG files

← Let’s Get Basted in script and capitals All 12 Let’s Get Basted designs Let’s Get Basted outline lettering →