Free Let’s Get Basted SVG

Let’s Get Basted in Lobster SVG

Let’s Get Basted in Lobster, as a solid black shape — Let’s Get Basted in Lobster. The preview is the SVG file itself.

“Let’s Get Basted” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 70 mm (3.94 × 2.76 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	15: 8 outer edges and 7 cut-outs
Cut length	1,225 mm at this size
Narrowest part	1.2 mm at this size
Nodes	474 curve and line segments

Measured from the file. PNG: 2,000 × 1,427 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.7 in (25 × 18 mm)	0.3 mm	311 mm	130	Too fine for most machines
2 × 1.4 in (51 × 36 mm)	0.61 mm	622 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.11 in (76 × 53 mm)	0.91 mm	933 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.81 in (102 × 71 mm)	1.2 mm	1,245 mm	8	Vinyl, card and thin sheet
6 × 4.21 in (152 × 107 mm)	1.8 mm	1,867 mm	2	Vinyl, card and thin sheet
8 × 5.62 in (203 × 143 mm)	2.4 mm	2,489 mm	2	Vinyl, card and thin sheet
12 × 8.42 in (305 × 214 mm)	3.7 mm	3,734 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Get Basted SVG files

← Let’s Get Basted in Pacifico All 12 Let’s Get Basted designs Let’s Get Basted in Kaushan Script →