Let’s Get Basted in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let’s Get Basted” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.42 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 22: 14 outer edges and 8 cut-outs |
| Cut length | 1,102 mm at this size |
| Narrowest part | 0.9 mm at this size |
| Nodes | 414 curve and line segments |
Measured from the file. PNG: 2,000 × 1,258 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 16 mm) | 0.23 mm | 280 mm | 140 | Too fine for most machines |
| 2 × 1.23 in (51 × 31 mm) | 0.46 mm | 560 mm | 40 | Too fine for most machines |
| 3 × 1.84 in (76 × 47 mm) | 0.69 mm | 840 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.46 in (102 × 62 mm) | 0.91 mm | 1,120 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 6 × 3.68 in (152 × 94 mm) | 1.4 mm | 1,679 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.91 in (203 × 125 mm) | 1.8 mm | 2,239 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.37 in (305 × 187 mm) | 2.7 mm | 3,359 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let’s Get Basted SVG files
-
Let’s Get Basted in Lilita One Solid · 14 pieces
-
Let’s Get Basted in Alfa Slab One Solid · 14 pieces
-
Let’s Get Basted in Amatic SC Solid · 14 pieces
-
Let’s Get Basted in block capitals Solid · 14 pieces
-
Let’s Get Basted in script and capitals Solid · 10 pieces
-
Let’s Get Basted with stars Solid · 14 pieces
-
Let’s Get Basted outline lettering Outline · 15 pieces
-
Let’s Get Basted stencil plate Solid · one piece
← Let’s Get Basted in Lobster All 13 Let’s Get Basted designs Let’s Get Basted in Lilita One →