Free Let’s Get Basted SVG

Let’s Get Basted in script and capitals SVG

Let’s Get Basted in script and capitals, as a solid black shape — Let’s Get Basted in script and capitals. The preview is the SVG file itself.

“Let’s Get” in Pacifico script over “BASTED” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.84 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	19: 10 outer edges and 9 cut-outs
Cut length	1,357 mm at this size
Narrowest part	1.7 mm at this size
Nodes	302 curve and line segments

Measured from the file. PNG: 2,000 × 1,463 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.43 mm	345 mm	130	Too fine for most machines
2 × 1.44 in (51 × 37 mm)	0.86 mm	689 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.16 in (76 × 55 mm)	1.3 mm	1,034 mm	15	Vinyl, card and thin sheet
4 × 2.88 in (102 × 73 mm)	1.7 mm	1,379 mm	6	Vinyl, card and thin sheet
6 × 4.33 in (152 × 110 mm)	2.6 mm	2,068 mm	2	Vinyl, card and thin sheet
8 × 5.77 in (203 × 147 mm)	3.5 mm	2,757 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.65 in (305 × 220 mm)	5.2 mm	4,136 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Get Basted SVG files

← Let’s Get Basted in block capitals All 12 Let’s Get Basted designs Let’s Get Basted with stars →