Let’s Get Basted stencil plate SVG
A rounded plate with “LET’S GET BASTED” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 62 mm (3.94 × 2.46 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 15: 1 outer edge and 14 cut-outs |
| Cut length | 1,273 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 310 curve and line segments |
Measured from the file. PNG: 2,000 × 1,277 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.62 in (25 × 16 mm) | 0.33 mm | 323 mm | 140 | Too fine for most machines |
| 2 × 1.25 in (51 × 32 mm) | 0.66 mm | 647 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.87 in (76 × 48 mm) | 0.99 mm | 970 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.5 in (102 × 63 mm) | 1.3 mm | 1,293 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.74 in (152 × 95 mm) | 2 mm | 1,940 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.99 in (203 × 127 mm) | 2.6 mm | 2,587 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.49 in (305 × 190 mm) | 4 mm | 3,880 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let’s Get Basted SVG files
-
Let’s Get Basted with a drop shadow Layered · 9 pieces -
Let’s Get Basted in Pacifico Solid · 6 pieces -
Let’s Get Basted in Lobster Solid · 8 pieces -
Let’s Get Basted in Kaushan Script Solid · 14 pieces -
Let’s Get Basted in Lilita One Solid · 14 pieces -
Let’s Get Basted in Alfa Slab One Solid · 14 pieces -
Let’s Get Basted in Amatic SC Solid · 14 pieces -
Let’s Get Basted in block capitals Solid · 14 pieces
← Let’s Get Basted outline lettering All 12 Let’s Get Basted designs Let’s Get Basted with a drop shadow →