Free Let’s Get Basted SVG

Let’s Get Basted with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Let’s Get Basted with a drop shadow, in layered colours
Let’s Get Basted with a drop shadow. The preview is the SVG file itself.

“Let’s Get Basted” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 64 mm (3.94 × 2.51 in), scales to any size
Pieces9 separate pieces
Outlines to cut24: 9 outer edges and 15 cut-outs
Cut length1,808 mm at this size
Narrowest part1.6 mm at this size
Nodes573 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,302 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.41 mm459 mm140Too fine for most machines
2 × 1.27 in (51 × 32 mm)0.81 mm918 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.91 in (76 × 49 mm)1.2 mm1,378 mm15Vinyl, card and thin sheet
4 × 2.55 in (102 × 65 mm)1.6 mm1,837 mm8Vinyl, card and thin sheet
6 × 3.82 in (152 × 97 mm)2.4 mm2,755 mm3Vinyl, card and thin sheet
8 × 5.1 in (203 × 129 mm)3.3 mm3,674 mm2Any material, including 3 mm wood and acrylic
12 × 7.64 in (305 × 194 mm)4.9 mm5,511 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Get Basted SVG files

← Let’s Get Basted stencil plate All 13 Let’s Get Basted designs Let’s Get Basted with a turkey →