Free Let’s Get Basted SVG

Let’s Get Basted in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Let’s Get Basted in Lilita One, as a solid black shape
Let’s Get Basted in Lilita One. The preview is the SVG file itself.

“Let’s Get Basted” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 49 mm (3.94 × 1.94 in), scales to any size
Pieces14 separate pieces
Outlines to cut21: 14 outer edges and 7 cut-outs
Cut length835 mm at this size
Narrowest part2.8 mm at this size
Nodes270 curve and line segments

Measured from the file. PNG: 2,000 × 1,023 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.71 mm212 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.98 in (51 × 25 mm)1.4 mm424 mm50Vinyl, card and thin sheet
3 × 1.48 in (76 × 37 mm)2.1 mm636 mm21Vinyl, card and thin sheet
4 × 1.97 in (102 × 50 mm)2.8 mm848 mm10Vinyl, card and thin sheet
6 × 2.95 in (152 × 75 mm)4.3 mm1,273 mm3Any material, including 3 mm wood and acrylic
8 × 3.94 in (203 × 100 mm)5.7 mm1,697 mm2Any material, including 3 mm wood and acrylic
12 × 5.9 in (305 × 150 mm)8.5 mm2,545 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Get Basted SVG files

← Let’s Get Basted in Kaushan Script All 13 Let’s Get Basted designs Let’s Get Basted in Alfa Slab One →